[Elecraft] Confusing K2 instruction

[Bob Nielsen]

On Sun, May 11, 2003 at 07:49:37PM -0400, Tom, W6WW wrote:
> K2 #3453 is now in process, and I am stumped already at page 17.  The
> instructions regarding R18 and R19 call for "short wire jumpers at R18 and
> R19."  Then R18 and R19 are installed.  This seems to result in a short
> across each of the resistors.  Am I missing something?


There are also R18 and R19 on the RF board, which are installed in a
much later step.  R18 and R19 on the Control board are wire jumpers
(see the parts list in Appendix A).  These are replaced with a
connector if either the KAF2 or KDSP2 are installed.

Bob, N7XY
K2 #3273