[Elecraft] Confusing K2 instruction

[Tom, W6WW]

Got it!  Thanks to each of you for chiming in with your help.  This list is
a fabulous resource!

73
Tom, W6WW

> On Sun, May 11, 2003 at 07:49:37PM -0400, Tom, W6WW wrote:
> > K2 #3453 is now in process, and I am stumped already at page 17.  The
> > instructions regarding R18 and R19 call for "short wire jumpers at R18
and
> > R19."  Then R18 and R19 are installed.  This seems to result in a short
> > across each of the resistors.  Am I missing something?
>
>
> There are also R18 and R19 on the RF board, which are installed in a
> much later step.  R18 and R19 on the Control board are wire jumpers
> (see the parts list in Appendix A).  These are replaced with a
> connector if either the KAF2 or KDSP2 are installed.
>
> Bob, N7XY
> K2 #3273
>
> _______________________________________________
> Elecraft mailing list: Elecraft@mailman.qth.net
> You must be a list member to post to the list.
> Postings must be plain text (no HTML or attachments).
> See: http://mailman.qth.net/mailman/listinfo/elecraft
> Elecraft Web Page: http://www.elecraft.com
>
>