[Elecraft] KAT100-1 with v.1.04 Chip

[Unifiedtx@aol.com]

Hello all,
Since there has been a thread about where the wattmeter is placed, I put my 
Bird 43 wattmeter between the K2/100 output and the KAT100-1 input.  Now for 
the real stuff...I placed the KAT100-1 in AUTO mode and tuned all bands into 
a 50 ohm dummy load and then put it into SWR (x.x-1) mode.  My tuner 
remembers the settings for all bands (including the 160 meter band) with the 
new v1.04 chip.  The LEDs are no longer erratic when the KAT100-1 is 
connected to an antenna.  The Bird wattmeter needle stays on zero with slug 
in reverse position.  Based on my findings I recommend the v1.04 chip.  
Roy Morris  W4WFB  KAT100-1, K2/100 #2225


--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment.  Attachments are not allowed.  To learn how
to post in Plain-Text go to: http://www.expita.com/nomime.html  ---