[Elecraft] No TX on ssb
Trevor Day
[email protected]
Wed Jan 22 05:02:01 2003
Tom, C167 should be removed; you should also remove links W2 and W3.
Trev G3ZYY
In message <004701c2c1d9$81dfff80$[email protected]>, Tom Buchanan
<[email protected]> writes
>Hello,
>
>I wonder what I am missing here? I just put the KS2B module in and
>connected the MH2 mic. Solder points look good and I followed the
>troubleshooting steps in the ssb adapter manual. Checking the DC voltages
>on the ssb module with the DMM on both RX & TX the voltages are within the
>proper ranges. No power out on ssb only. Troubleshooting tips at the
>Elecraft website - "no TX power out? Make sure C167 (RF) is installed."
>However in the manual for the ssb adapter C167 is removed.
>
>Any ideas on what the problem might be?
>
>Thanks,
>
>Tom KG4KGY
>#2688
>
>_______________________________________________
>Elecraft mailing list: [email protected]
>You must be a list member to post to the list.
>Postings must be plain text (no HTML or attachments).
>See: http://mailman.qth.net/mailman/listinfo/elecraft
>Elecraft Web Page: http://www.elecraft.com
--
Trevor Day