[Elecraft] TX/RX Discrepancy

[Lyle Johnson]

> ... Whilst doing this I have found that the
> Tx and Rx frequencies are around 800 Hz apart (Tx high) and I have so
> far been unable to find the reason.  C22 adjustment for freq accuracy
> has no effect.

Is the mode CW?  Might be the sidetone frequency offset.  Or RIT or XIT
might be enabled, or...

C22 is only adjusted when you are going to do a Cal PLL or Cal Fil, and then
only if it is off frequency.

73,

Lyle KK7P