[Elecraft] TX/RX Discrepancy

Tue Jan 21 15:47:08 2003

Thanks Lyle;  no its SSB, I didn't really expect C22 Call PLL Cal FIL to 
have any effect, but I zeroed it in to a known source anyway.  I can't 
for the life of me see why there should be an offset when using SSB! 
No XIT/RIT or split enabled.

Trev

In message <[email protected]>, Lyle 
Johnson <[email protected]> writes
>> ... Whilst doing this I have found that the
>> Tx and Rx frequencies are around 800 Hz apart (Tx high) and I have so
>> far been unable to find the reason.  C22 adjustment for freq accuracy
>> has no effect.
>
>Is the mode CW?  Might be the sidetone frequency offset.  Or RIT or XIT
>might be enabled, or...
>
>C22 is only adjusted when you are going to do a Cal PLL or Cal Fil, and then
>only if it is off frequency.
>
>73,
>
>Lyle KK7P
>
>
>_______________________________________________
>Elecraft mailing list: [email protected]
>You must be a list member to post to the list.
>Postings must be plain text (no HTML or attachments).
>See: http://mailman.qth.net/mailman/listinfo/elecraft
>Elecraft Web Page: http://www.elecraft.com

-- 
Trevor Day