[Elecraft] K2 #3021 -- Press On or Not:

Sun Jan 5 08:37:01 2003

Thanks Stephan (and Gil, who also pointed this out) -- I have these caps! 
I shall press on!

73, Martin

> Hi Martin
>
> just a little comment on the "missing" caps - I thought I had the same
> problem but after mailing with Elecraft I found them:
>
> the 47pF and 56pF are 5% values, that is they are among the blue, small
> ones with 470J and 560J written on them...
>
> I looked among the brown ones in the first place too ;-)
>
> 73, Stephan, HB9DDO, S/N 3128
>
> P.S. I just finished assembly and test, part 2 without any big problem
> up till now - spent a lot of time since the package arrived just before
> xmas :-)
>
>
>
> -----Urspr�ngliche Nachricht-----
>
> Von: [email protected]
>
> [mailto:[email protected]]Im Auftrag von Martin AC6RM
>
> Gesendet: Sonntag, 5. Januar 2003 08:25
>
> An: [email protected]
>
> Betreff: [Elecraft] K2 #3021 -- Press On or Not:
>
>
>
> Howdy;
>
> I'm at the point in the assembly manual where I'm about to begin
>
> "Alignment and Test Part II." A good chunk of the RF board is
>
> complete. There are a few caps missing from the kit, though (all 4 of
>
> the 47pf and all 4 of the 56pf). While I hunt those up and wait for
>
> them to come in (or for Abletronics to open on Monday), can I plow on
>
> ahead with the installation of the rest of the components? My
>
> girlfriend says I should wait. My daughter's retort is always
>
> "Patience is Waiting Without Complaining." I'm kinda anxious to press
>
> on while the iron's hot.
>
> 73, Martin
>
>
>
>
>
> _______________________________________________
>
> Elecraft mailing list: [email protected]
>
> You must be a list member to post to the list.
>
> Postings must be plain text (no HTML or attachments).
>
> See: http://mailman.qth.net/mailman/listinfo/elecraft
>
> Elecraft Web Page: http://www.elecraft.com
>
>
> --- StripMime Report -- processed MIME parts ---
> multipart/alternative
>   text/plain (text body -- kept)
>   text/html
> The reason this message is shown is because the post was in HTML
> or had an attachment. Attachments are not allowed.
> Please post in Plain-Text only.---
> _______________________________________________
> Elecraft mailing list: [email protected]
> You must be a list member to post to the list.
> Postings must be plain text (no HTML or attachments).
> See: http://mailman.qth.net/mailman/listinfo/elecraft
> Elecraft Web Page: http://www.elecraft.com