[Elecraft] K2 #3021 -- Press On or Not:

Sun Jan 5 05:42:01 2003

Hi Martin

just a little comment on the "missing" caps - I thought I had the same =
problem but after mailing with Elecraft I found them:

the 47pF and 56pF are 5% values, that is they are among the blue, small =
ones with 470J and 560J written on them...

I looked among the brown ones in the first place too ;-)

73, Stephan, HB9DDO, S/N 3128

P.S. I just finished assembly and test, part 2 without any big problem =
up till now - spent a lot of time since the package arrived just before =
xmas :-)

-----Urspr=FCngliche Nachricht-----

Von: [email protected]

[mailto:[email protected]]Im Auftrag von Martin AC6RM

Gesendet: Sonntag, 5. Januar 2003 08:25

An: [email protected]

Betreff: [Elecraft] K2 #3021 -- Press On or Not:

Howdy;

I'm at the point in the assembly manual where I'm about to begin

"Alignment and Test Part II." A good chunk of the RF board is

complete. There are a few caps missing from the kit, though (all 4 of

the 47pf and all 4 of the 56pf). While I hunt those up and wait for

them to come in (or for Abletronics to open on Monday), can I plow on

ahead with the installation of the rest of the components? My

girlfriend says I should wait. My daughter's retort is always

"Patience is Waiting Without Complaining." I'm kinda anxious to press

on while the iron's hot.

73, Martin

_______________________________________________

Elecraft mailing list: [email protected]

You must be a list member to post to the list.=20

Postings must be plain text (no HTML or attachments).=20

See: http://mailman.qth.net/mailman/listinfo/elecraft

Elecraft Web Page: http://www.elecraft.com

--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment. Attachments are not allowed.
Please post in Plain-Text only.---