[Elecraft] Re: K2 # 3877 is ALIVE!

[Wayne Burdick]

Hi Dave,

Running Spectrogram is optional, but you must at least adjust all of your BFO
frequencies according to the filter/BFO chart using CAL FIL. This forces the
firmware to check the BFO frequencies for each mode, and correctly compensates
using the synthesizer. If you don't do this, you'll be off frequency.

73,
Wayne
N6KR


DAVE HEALY wrote:
> 
> K2 #3877 is ALIVE!
> 
> Yes, another one added to the living!
> 
> Receives better than my Icom 746. Xmt yet to verified on the air.
> 
> Only one small anomaly: When receiving a signal and different filters are selected, the signal changes frequency from .5 to 2 KHz. It must then be retuned....

-- 

http://www.elecraft.com