[Elecraft] KFL1-4 Filter Board Alignment - No go on 14 MHz ... Ooops, I fixed it!

[Dee Hester]

Sorry to bother you guys ... especially since I just posted my notes to
the reflector, and to you Tom, only five minutes ago.
 
After posting, I went back through the reflector's archives looking for
similar posts and solutions.  From the reading, I came to the conclusion
that somehow my 20 meter section wasn't close enough in the "rough
tuned" segment to generate any output.  So, I connected my 5 Khz signal
generator to the antenna input and repeaked the trimmers.  At first, I
could barely hear the generator.  After peaking, of course, the tone was
blowing my headphones off.  I disconnected the signal source and
re-connected the Bird Wattmeter w/dummy load.  Bang!  Immediate output
on transmit.  
 
Sorry for the brain fade, fellas.  Many thanks to those of you who
responded and those of you who already posted the solutions
way-back-when.
 
Best,
 
Dee K7UD
 
 


--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment.  Attachments are not allowed.  To learn how
to post in Plain-Text go to: http://www.expita.com/nomime.html  ---