[Elecraft] Further K2 IOC ver. 1.02 Question

Sat Aug 2 21:42:00 2003

Brian:
  I would sure be interested in any answer you get to your question.  I 
asked the same thing a long time ago, twice, and got no response from 
anyone.  So I just gave up.  I have been using I/O version 1.02 along with 
PIC version 2.02h for a while, and it seems to work fine, at least with the 
KPA100.  I would, however, like to know if it is necessary for any reason 
to upgrade to 1.03 or whatever is currently the latest.

best wishes,

dave belsley, w1euy

--On Saturday, August 2, 2003 7:36 PM -0400 Brian Wruble 
<[email protected]> wrote:

> Hi all:  Am just upgrading my K2 firmware from 2.01h which came with the
> original K2 (#2528) to 2.02h which came with the KPA100 kit.  I am doing
> this as a part of the A to B upgrade instructions.  To my surprise, the
> Section 11 ("Firmware Installation") instructions tell me I need to
> upgrade The I/O Controller ("IOC") if my version is 1.05 or earlier.  I
> have version 1.02.  I guess I'll have to order the latest.  The question
> is, will this thing work if I stay with my 1.02 to do the alignments?
> Should a later version of the IOC have come with the A to B upgrade kit,
> or was it intended that I order it separately?
>
> Tnx.  73 de Brian W3BW
>
>
> _______________________________________________
> Elecraft mailing list: [email protected]
> You must be a list member to post to the list.
> Postings must be plain text (no HTML or attachments).
> See: http://mailman.qth.net/mailman/listinfo/elecraft
> Elecraft Web Page: http://www.elecraft.com

----------------------------------
David A. Belsley
Professor of Economics