[Elecraft] adding grille cloth to K2, K1, KBT1

Tue Sep 17 15:52:04 2002

Not sure if it applies but I fixed a grille cloth to my K2 using 3M spray
adhesive. I masked the inside top cover (to the size of the cloth), gave it
a spritz and applied the grille cloth to the cover. I then applied my
soldering iron thru the mounting holes to clear a path for the screws.

Works super!

Mike - AD5IU

----- Original Message -----
From: "Wayne Burdick" <[email protected]>
To: "Elecraft" <[email protected]>
Sent: Tuesday, September 17, 2002 1:41 PM
Subject: [Elecraft] adding grille cloth to K2, K1, KBT1

> We like the grille cloth we use with the KPA100 so much that we're going
to add it to all
> of our kits that use speakers (K2, K1, and KBT1). We'll post something
about this in more
> detail later, including info on how to obtain the grille cloth if you have
an older kit.
>
> But first, I have a question for those who have added their own grille
cloth to the KBT1
> top cover. What method did you use to secure it? I'm sure that taping it
to the top cover
> will work, but it would be nice to know what type of tape has been used
successfully.
>
> Thanks,
> Wayne
> N6KR
>
>
> --
>
> http://www.elecraft.com
> _______________________________________________
> Elecraft mailing list: [email protected]
> You must be a list member to post to the list.
> Postings must be plain text (no HTML or attachments).
> See: http://mailman.qth.net/mailman/listinfo/elecraft
> Elecraft Web Page: http://www.elecraft.com