[Elecraft] K2 w/KSB CW reverse BFO

[kc4kgu@ENTERZONE.NET]

On Wed, 30 Oct 2002, Don Wilhelm wrote:

> John,
> When the BFOs for any particular filter are setup properly and provided the
> signal is zero-beat with your sidetone, there should be no shift (you should
> not have to change the VFO).
> 
> Using Spectrogram and a noise generator will allow you to set your K2 as
> closely as 10 to 20 Hz - from your numbers, your setup seems to cause a 400
> Hz shift.
> 
> 73,
> Don W3FPR


Don,

Thanks.  After seeing another post that indicated my K2 was not aligned
properly, I just calibrated the CW filters.  There is now very little
difference between CW + CWR.  I guess we know how much I use CW now, huh?
I hadn't redone the CW filter CAL after building the KAT100.


73 de John - KC4KGU
K2/100 #2490