[Elecraft] ssb

[Michael]

I have been setting up a Rigblaster to my K2 and learning about Digipan. =
 All seemed to be OK.  The next day I went to use ssb and it didn't =
work.  When I keyed the mic the rig did not transmit.  I turned on =
Digipan and hit transmit and it did what it is supposed to do but the k2 =
didn't transmit.  I'm checking out the mic jack since the mic and =
Rigblaster plugs fit real stiff and require some pulling to get them =
unplugged.  I don't think that is the problem.  Anybody have any idea =
where to start?  I can't figure out what happened.  When I set the k2 to =
cw and hit xmit on digipan it does transmit and all else seems to work =
fine.  I checked ssb output with the meter set to ALC and got no =
reading.  I also checked it with a freq counter and got nothing in ssb =
but OK with cw.  Just when I thought all was going fine and I was going =
to get ready to start the PA and order the kat100-1 in the near future.  =
Thanks again and 73,
Michael
kc2fnl


--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment. Attachments are not allowed.
Please post in Plain-Text only.---