[Elecraft] KAT100 LED assembly

Mon Nov 11 16:22:00 2002

I mentioned this fact in my notes during the field test.  I don't know why
it didn't make it into the final manual.  Oh well.  The BODY of the LEDs
go flat against the PCB.  You have to force them in all of the way.

73 de John - KC4KGU
K2/100 #2490

On Mon, 11 Nov 2002, Vic Rosenthal wrote:

> The KAT100 manual says the front-panel LEDs must be flat against the
> board.  The leads of the LEDs have little crimps that stop them from
> being inserted all the way.  Is the manual correct and I should force
> them in all the way (or file the crimps), or should I just go as far
> as the crimp?
> 
> I think they need to go in all the way, but I just want to be sure.
> 
> Vic K2VCO
> _______________________________________________
> Elecraft mailing list: [email protected]
> You must be a list member to post to the list. 
> Postings must be plain text (no HTML or attachments). 
> See: http://mailman.qth.net/mailman/listinfo/elecraft
> Elecraft Web Page: http://www.elecraft.com
> 