[Elecraft] K1 #690: No power out on TX

[BobDobson@aol.com]

Well, I guess in spite of being careful and triple-checking
everything, I have run into a problem.  When I started the
"Alignment and Test, Part II", I was unable to get any
power out of the K1.  I'm using the KFL1-4 4-band module.
The LCD display constantly indicates "P0.1".  Adjusting the
trimmers has no effect on any band.  

- The maximum output power is set o 2.0 watts.
- The voltage checks on page 46 are all perfect.
- I verified all components were properly installed.
- The toroids were wound properly, stripped and tinned.
- Nothing is getting hot or smelly (sniff test passed)
- I went over virtually every solder joint in the transmitter
  section and touched them up, even though they all
  looked good.
- The keyer seems to work; that is, I get a sidetone.

Any suggestions?

Thanks and 73,

Bob  WA4FOM


--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
---