[Elecraft] KPA100 Split Question/Philosophy

Sat Jun 29 10:20:00 2002

Hi Mario,

I've been told that there will be a bnc connector on the KAT100 marked
"Aux". This can be used to feed in RF from the K2.

73' Leo.

----- Original Message -----
From: "Mario Lorenz" <[email protected]>
To: <[email protected]>
Sent: Saturday, June 29, 2002 3:15 PM
Subject: Re: [Elecraft] KPA100 Split Question/Philosophy

> Am 29. Jun 2002, um 07:56:43 schrieb Lee Buller:
>
> > 1.  Why not use jacks and plugs on the EC2 enclosure?  Seeing all those
> > cables in the back give me pause.  It doesn't seem flexible enough for
> > me.  What happens if I want the amp more that just beside the rig.  Ok,
add
> > more cable.  Duh.  But why not use another BNC connector and the
associated
> > connectors for the control lines and such?  Just wondering....
>
> KI6WH's variant indeed calls for a BNC connector in the EC2, which looks
nice.
>
> Eric or Wayne, I don't know how far the KAT2/100 design has evolved
already,
> but if possible, could you please give a hint on where one would place the
BNC
> connector on the back of the EC2 so that it will not collide with the
KAT2/100
> that will go into the case later ?
>
> Mario
>
> --
> Mario Lorenz                            Internet:    <[email protected]>
>                                         Ham Radio:
DL5MLO@OK0PKL.#BOH.CZE.EU
>  "I hear that if you play the NT 4.0 CD backwards, you get a Satanic
message!"
>  "That's nothing. If you play it forward, it installs NT 4.0!"
> _______________________________________________
> Elecraft mailing list: [email protected]
> You must be a list member to post to the list.
> Postings must be plain text (no HTML or attachments).
> See: http://mailman.qth.net/mailman/listinfo/elecraft
> Elecraft Web Page: http://www.elecraft.com
>