[Elecraft] OP1 - 5

[Don Brown]

Hi

Sorry for the confusion. I meant to say you can set all of the all of the=
 filters FL1- FL4 to OP1 and vary the BFO on FL3 and 4 to simulate IF tun=
ing. As far as I can determine OP1 - OP5 are all the same and the bandwid=
th is fixed by the SSB module. Maybe at some time Elecraft will offer a d=
ifferent filter module that will take advantage of OP2-OP5 but for now it=
 doesn't matter which one you select they are all the same.

Don Brown
KD5NDB

----- Original Message -----
From: Vic Winton
Sent: Friday, July 05, 2002 4:57 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] OP1 - 5


All,

Do I read this right?

Can I really set OP 2 - 5 differently and therefore do as Don suggests?

So,if I understand this correctly,  for ssb use I can set FL1-4 as follow=
s:
FL1 as OP and FL2-4 as cw the filter at various widths (say 2.0,  1.8 etc=
).
But IN ADDITION my FL1 setting can be varied if I switch between OP1 - 5.
Thus I get a switchable IF shift effect.

Is this correct?

Presumably the OP 1-5 switching could be put on to one of the programmabl=
e
buttons to make it easier than scrolling througgh the menus...

Why did I not realise this before?

Regards,


Vic   GW4JUN

K2 1926

snip...
Hi

OP1 - OP5 are all the same and select the SSB module. I guess the other
OP3-5 may be for future filter modules but for now OP1 is used on transmi=
t
and OP2 is used on receive. You can set up the filters for OP2- OP5 and
shift the BFO setting for each to simulate IF tuning


Don Brown
KD5NDB
snip...

****** Internet Email Confidentiality ****** =20
Privileged/Confidential Information may be contained in this message.  If
you are not the addressee indicated in this message (or responsible for
delivery of the message to such person), you may not copy or deliver this
message to anyone. In such case, you should destroy this message and kind=
ly
notify the sender by reply email. Please advise immediately if you or you=
r
employer do not consent to Internet email for messages of this kind. =20

Opinions, conclusions and other information in this message that do not
relate to the official business of Carrington Wire Ltd shall be understoo=
d
as neither given nor endorsed by it. =20
********************************************
_______________________________________________
Elecraft mailing list: Elecraft@mailman.qth.net
You must be a list member to post to the list. =20
Postings must be plain text (no HTML or attachments). =20
See: http://mailman.qth.net/mailman/listinfo/elecraft
Elecraft Web Page: http://www.elecraft.com


--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment. Attachments are not allowed.
Please post in Plain-Text only.---