[Elecraft] OP1 - 5

[ZOOM]

Yes OP-1-5 are all the same except if you have done the 2nd_xil_ssb_mod.
The mod can only be activated by OP-1.  Therefore if you set your other
filters on OP-2-5, the mod is disabled on those filter settings.  You can
set all your SSB filter position to OP-1 and adjust each filter setting
individually using spectrogram and get the benefit of the mod on each
setting.

Robert
VE3RPF

----- Original Message -----
From: "Don Brown" <DolfinDon@msn.com>
To: "Vic Winton" <vic.winton@carringtonwire.com>; "Elecraft"
<elecraft@mailman.qth.net>
Sent: Friday, July 05, 2002 8:37 AM
Subject: Re: [Elecraft] OP1 - 5


Hi

Sorry for the confusion. I meant to say you can set all of the all of the
filters FL1- FL4 to OP1 and vary the BFO on FL3 and 4 to simulate IF tuning.
As far as I can determine OP1 - OP5 are all the same and the bandwidth is
fixed by the SSB module. Maybe at some time Elecraft will offer a different
filter module that will take advantage of OP2-OP5 but for now it doesn't
matter which one you select they are all the same.

Don Brown
KD5NDB