[Elecraft] Scan resume

["D.R. Weiss KIØRP"]

I just learned how to do scanning, so I may be able to help with your Scan 
Resume problem:

1.  Tap MENU, and make sure you're in the Primary menu (it will say Pri).
2.  Scroll to PF1 or PF2, whichever key you want to use for Scan Resume.
3.  Hold MENU to select the submenu for that key.
4.  Scroll until SCAn appears.
5.  Hold MENU to select that entry and to exit the menu.

These steps will set PF2 [or PF1] for Scan Resume.  To USE the Scan Resume 
function, Hold the appropriate key (PF1 or PF2).  To RESUME scanning, I 
assume you know that scanning first has to be initiated in the manner 
outlined in the manual.

Dave Weiss KI0RP
K2 #2249

At 05:49 PM 1/14/02 +0000, you wrote:
>Dear all,
>
>I'm missing something here I think. According to my K2 manual and firmware
>manual (K2 manual rev. C, Firmware revision 2 manual rev. A) I should be
>able to set up my K2 so that I can do a scan resume and program that into
>say PF2. I can't work out how to set up a scan resume at all, let alone
>program it into PF2.