[Elecraft] T4 question

[Vic Rosenthal]

Nicholas Lokuciewski wrote:
> 
> If I use the dimensions in the manual the transformer will stand about a
> centimetre of the board. It looks like the dimensions need about 10mm taken
> off them, ie cable length from core to tip 12mm and strip 3mm of the end of
> the lead.

The wire lengths are given slightly longer than needed to make the winding job
easier.  After winding the transformer, trim them so it will set right on the
board.

73,
Vic, K2VCO
Fresno CA