[Elecraft] K2 and Logger

Sun Dec 22 13:59:01 2002

This strange beheaviour was only related to my unsufficient knowledge of the
software.

    Open the CONFIG window in the logging box
    check the "CHECK TO ENABLE LOGBOOK TO BE CONTROLLED BY THE RADIO"

and it works ...
sorry for the bandwidth !!

Merry Xmas and happy New Year to everybody, with many more kits to build, or
to improve !

Chris / F6FTB / K2 #644
----- Original Message -----
From: Christian GONDARD <[email protected]>
To: elecraft <[email protected]>
Sent: Tuesday, December 17, 2002 9:02 PM
Subject: [Elecraft] K2 and Logger

> I am using the (excellent) Logger V 7.09 software for my usual logging
> software, and also MIXW 2.02 for RTTY contests.I operate the K2 #644 +
> KPA100 + KAT100.
>
> Here is my trouble :
>
> * When I connect the RS232 cable to my laptop and run the MIXW 2.02 soft,
> the K2 frequency and mode are correctly recognized and displayed.
> * When I run LOGGER, only the frequency is read, not the mode. I use the
> standard "KENWOOD" radio type and all the other settings recommanded for
the
> radio Port= 4800 bauds, Flow control= none, data bits=8; echo= off, stop
> bits=1.
>
> Any ideas ?
>
> Chris / F6FTB.
>
>
> _______________________________________________
> Elecraft mailing list: [email protected]
> You must be a list member to post to the list.
> Postings must be plain text (no HTML or attachments).
> See: http://mailman.qth.net/mailman/listinfo/elecraft
> Elecraft Web Page: http://www.elecraft.com
>
>