[Elecraft] K2 and Logger

Fri Dec 20 02:21:08 2002

Same thing here, with logger.
I think that logger is only reading the frequency.
The mode is retrieved for a bandplan table

Pierre F5MOG

----- Original Message -----
From: "Christian GONDARD" <[email protected]>
To: "elecraft" <[email protected]>
Sent: Tuesday, December 17, 2002 8:02 PM
Subject: [Elecraft] K2 and Logger

> I am using the (excellent) Logger V 7.09 software for my usual logging
> software, and also MIXW 2.02 for RTTY contests.I operate the K2 #644 +
> KPA100 + KAT100.
>
> Here is my trouble :
>
> * When I connect the RS232 cable to my laptop and run the MIXW 2.02 soft,
> the K2 frequency and mode are correctly recognized and displayed.
> * When I run LOGGER, only the frequency is read, not the mode. I use the
> standard "KENWOOD" radio type and all the other settings recommanded for
the
> radio Port= 4800 bauds, Flow control= none, data bits=8; echo= off, stop
> bits=1.
>
> Any ideas ?
>
> Chris / F6FTB.
>
>
> _______________________________________________
> Elecraft mailing list: [email protected]
> You must be a list member to post to the list.
> Postings must be plain text (no HTML or attachments).
> See: http://mailman.qth.net/mailman/listinfo/elecraft
> Elecraft Web Page: http://www.elecraft.com