[Elecraft] NZ7C: K2/100 & LGD MP-11 questions

Tue Aug 27 22:47:04 2002

Thanks Kevin - well, I noticed some initial SWRs of 9.9 without it
automatically tuning but perhaps you have the asnwer - I will play with
it some more and observe the SWR more closely. 

My other question?  well, dah, I heard the tone because it was coming
from the monitoring receiver - sometimes I just crack myself up with my
own idiocy!!! Thanks again. 73/Tim

[email protected] wrote:
> 
> I also have the LDG MP-11 and the K2/100.  I find if the MP-11 is set on auto and I hit the tune button on the K2 the tuner tunes only if the SWR reads greater than
> about 2:1.  If it is lower I need to also hit the tune button on the MP-11.
>    Kevin   KD5ONS
> 
> 8/27/2002 8:12:13 PM, Tim and Nancy Logan <[email protected]> wrote:
> 
> >Hi folks -
> >Well, so far everything seems a go with my K2/100. Howvere, when I hook
> >it up to my LDG tuner (the large one, not the little Z-11) I cannot get
> >the K2 to activate the tuner unless I push the tune button on the LDG.
> >If I do press the tune button it seems to tune properly. Shouldn't the
> >K2 automatically activate the LDG?
> >
> >Also, when I did the transmit tests into a dummy load and pressed tune,
> >I could here the tune tone. When I have the K2 hooked to the LDG and hit
> >tune, I do not hear the tune tone. Is that to be expected?
> >
> >Thanks for your help.  73/Tim
> >_______________________________________________
> >Elecraft mailing list: [email protected]
> >You must be a list member to post to the list.
> >Postings must be plain text (no HTML or attachments).
> >See: http://mailman.qth.net/mailman/listinfo/elecraft
> >Elecraft Web Page: http://www.elecraft.com
> >