[Elecraft] SPOT, Problem Resolved

Sun Aug 25 09:46:00 2002

Jim,

	That was it. I had somehow set the source to U8-4 and it was 
supposed to be U6-25. I had tired both with no results before. What I 
did find out is that after changing it you have to power down and 
then power back up again before the change takes place. I found this 
out by accident, but thank goodness I did find it. I sure am happy 
that I don't have to go taking the rig apart and changing components. 
Thanks a bunch for your suggestion Jim. For those following the 
thread, if a change does not work to resolve an issue, try power down 
and power up before deciding if it worked or not. What a great list 
this is.

Thanks Again Jim and Steve,

Mike
K2 s/n 02097 Back in action again !!!!!!!!!

>Sounds like you might have accidentally got into the firmware menu that
>selects the sidetone source and set it incorrectly.  Look in you software
>addendum to see where it is located in the firmwaree menus and reset it.
>73
>Jim  K4ZM
>----- Original Message -----
>From: "kb1dxc" <[email protected]>
>To: <[email protected]>
>Cc: <[email protected]>; "Steve Knell" <[email protected]>
>Sent: Sunday, August 25, 2002 7:45 AM
>Subject: Re: [Elecraft] SPOT, Gone but not forgotten
>

-- 
"All change is not growth, all movement is not forward."
    -- Ellen Glasgow

KB1DXC, Stamford, Ct.

Visit our club web site at:

http://www.qsl.net/w1ee/ctsara.htm

Our repeater is on 146.655, negative offset of 600 and a tone of 100