[Elecraft] Power Supply for K2/100

Thu Aug 15 10:38:00 2002

hi

The MFJ 20 amp switcher without meters will fit into the EC2. This has al=
ready been done by several hams. I don't know how big the KAT100 board wi=
ll be so not sure if it will fit in there also. From the sound of monster=
 toroids it will probably take up most of the bottom of the EC2 so it is =
not likely the power supply will fit also.

Don Brown
KD5NDB =20

----- Original Message -----
From: Ulrich H. Steinberg
Sent: Thursday, August 15, 2002 7:54 AM
To: [email protected]
Subject: [Elecraft] Power Supply for K2/100

Has anyone found a switching power supply with 20A or more that fits well=
 into an EC2 cabinet?  Or even better:  one that is no higher than 1.5", =
is very quiet on RF, fits in the EC2, and leaves enough room to squeeze i=
n the KAT100 with sufficient shielding?  If such a thing is not commercia=
lly available are there any proven plans to build one yourself?  =20

--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment. Attachments are not allowed.
Please post in Plain-Text only.---
_______________________________________________
Elecraft mailing list: [email protected]
You must be a list member to post to the list. =20
Postings must be plain text (no HTML or attachments). =20
See: http://mailman.qth.net/mailman/listinfo/elecraft
Elecraft Web Page: http://www.elecraft.com

--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment. Attachments are not allowed.
Please post in Plain-Text only.---