[EIDXA] PSK

[Jason Joens]

Thanks Rich. :)  Using Digital Master here for digital modes.  Came with Ham
Radio Deluxe.

73
Jason

-----Original Message-----
From: Richard Haendel [mailto:rhaendel at Q.com] 
Sent: Monday, January 14, 2013 6:29 PM
To: Jason Joens
Subject: Re: PSK

Jason, For PSK, put your dial on one of these freq and use USB, If you use
Digipan or FLDIGI, the spectrum will be above the dial freq. Either program
will decode multiple carriers. Just click on the carrier of interest and
transmit. No need to use split mode.  7.035 or 7.070, 10.139, 14.070,
18.100, 21.070, 24.920, or 28.120.

By the way, FLDIGI decodes and transmits about 20 different modes including
RTTY and Hellschreiber.

73 Rich W3ACO

----- Original Message -----
From: "Jason Joens" <pixelpaint at mchsi.com>
To: "EIDXA Reflector" <eidxa at mailman.qth.net>
Sent: Monday, January 14, 2013 5:53 PM
Subject: Re: [EIDXA] Filling out EIDXA Membership application.


> Hi Larry.
> Good to hear that you got it working.
>
> The tricky part for me is figuring out the frequency.  When I look on the
> cluster, I see some station working RTTY on come frequency.  When I go to
> that frequency, in sideband to use my RIGBlaster, he isn't there!   What
> the???   &%$*@#&%!!!
>
> Most of the time they post the frequency in actually RTTY mode on your
> radio.  I learned to go Down 1 in Sideband, and there he is waiting for 
> me!
>
> The RIGBlaster is good for more than just RTTY, too.  You're now set up 
> for
> SlowScan TV, and a host of other modes, like PSK31, which is probably the
> most popular digital mode going now.  Go to 14.070.5 and there's all kinds
> of guys working the world on 35 watts with PSK31.
>
> You can also look into JT65, too.  That's a funny mode to play with, but 
> you
> can print something that's 20+DB BELOW the noise floor!  Wild stuff. 
> Heinz
> used to use JT65 to work Moonbounce on 6 meters.
>
> Have fun with the new toy!!
>
> Jason
> KD0MND
>
> -----Original Message-----
> From: Larry & Karen [mailto:k0is at iowatelecom.net]
> Sent: Monday, January 14, 2013 4:56 PM
> To: 'John Andrews'; 'Jason Joens'; 'EIDXA Reflector'
> Subject: RE: [EIDXA] Filling out EIDXA Membership application.
>
> Hi, John and Jason,
>
> Just saw the email come through from John and thought I'd let you guys and
> everyone else know that K0IS is now on FSK RTTY and chasing "new ones."  I
> finally got the Rigblaster Advantage to work with the PRO III and if 
> anyone
> needs any help, I've learned just enough so far to be dangerous.  I will
> pass along that West Mountain Radio uses an ICOM 756 PRO II for all of 
> their
> testing, so if they say it works on ICOM gear and yours doesn't.....
>
> Believe it or not, it took me a week of on and off trial and error before
> talking to Sholto at WMR on the phone.  We didn't get it going at that 
> time,
> and I ordered a recommended cable for FSK keying (only $9.95), but after
> talking to him a dim light finally came on upstairs and I found out how
> simple it was to get going.
>
> 73, Larry  K0IS
>
> -----Original Message-----
> From: eidxa-bounces at mailman.qth.net [mailto:eidxa-bounces at mailman.qth.net]
> On Behalf Of John Andrews
> Sent: Monday, January 14, 2013 4:46 PM
> To: Jason Joens; EIDXA Reflector
> Subject: Re: [EIDXA] Filling out EIDXA Membership application.
>
> Yeah that should work, but it would be funnier if you added stuff like
> contacting aliens and calling CQ for North Korea. Hi hi
>
> Jason Joens <pixelpaint at mchsi.com> wrote:
>
>>Operating Interests:__________
>>
>>
>>
>>Lets see here, DX, CW, QRP, EME, APRS, RTTY....Wait, can I just type in
>>the whole alphabet a few times instead?  That should work, right?
>>
>>
>>
>>
>>
>>HI HI
>>
>>
>>
>>Jason
>>
>>______________________________________________________________
>>EIDXA mailing list
>>Home: http://mailman.qth.net/mailman/listinfo/eidxa
>>Help: http://mailman.qth.net/mmfaq.htm
>>Post: mailto:EIDXA at mailman.qth.net
>>
>>This list hosted by: http://www.qsl.net Please help support this email
>>list: http://www.qsl.net/donate.html
>
> --
> Sent from my Android phone with K-9 Mail. Please excuse my brevity.
> ______________________________________________________________
> EIDXA mailing list
> Home: http://mailman.qth.net/mailman/listinfo/eidxa
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:EIDXA at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
> ______________________________________________________________
> EIDXA mailing list
> Home: http://mailman.qth.net/mailman/listinfo/eidxa
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:EIDXA at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html