[Dxbase] MicroHam CW keyer and Omni 6 interface cable?

[Fred Handscombe]

Chuck

The great thing about Microham is that they publish on their web site 
schematics of all their cables so you can make your own if you want to.  Its 
handy when u change rigs etc

http://www.microham.com/Downloads/CAT%20CIV.pdf is the cable for the Omni VI

Its a mini stereo at the Mucirham end and a mono mini at the TT end

For the other MH units look under "support"

73 Fred
G4BWP


----- Original Message ----- 
From: "Chuck Guenther" <ni0c at earthlink.net>
To: <dxbase at mailman.qth.net>
Sent: Sunday, January 14, 2007 8:59 PM
Subject: [Dxbase] MicroHam CW keyer and Omni 6 interface cable?


Anyone else out there using the microHam CW keyer with DXBase and an Omni 6 
rig?

What kind of cable is used for the radio interface?  Is it as simple as a 
cable with mini stereo phone plugs at both ends?  Or does it have a 25-pin 
connector at the radio end?

I purchased the keyer for use with my K2, and couldn't get it to work with 
my newly built KIO2 interface.  So, I tried hooking up the keyer to the Omni 
6 with just the stereo plug and couldn't get communications with the Omni 
either.

Hope I haven't damaged the keyer.

73,
Chuck  NI0C
______________________________________________________________
Dxbase mailing list
Home: http://mailman.qth.net/mailman/listinfo/dxbase
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dxbase at mailman.qth.net