[Dxbase] MicroHam CW keyer and Omni 6 interface cable?

[Chuck Guenther]

Fred.
Thanks for pointing me in the right direction.  The cable did turn out to be
different than I thought, but I built one and my radio interface now works!
(Turns out to be a 3.5 mm monaural plug on one end, and a 3.5 mm stereo plug
at the other end with tip and ring shorted together).

Thanks again & happy new year!

73,
Chuck  NI0C

----- Original Message ----- 
From: "Fred Handscombe" <fredch at homeshack.freeserve.co.uk>
To: "Chuck Guenther" <ni0c at earthlink.net>; <dxbase at mailman.qth.net>
Sent: Sunday, January 14, 2007 11:33 PM
Subject: Re: [Dxbase] MicroHam CW keyer and Omni 6 interface cable?


> Chuck
>
> The great thing about Microham is that they publish on their web site
> schematics of all their cables so you can make your own if you want to.
Its
> handy when u change rigs etc
>
> http://www.microham.com/Downloads/CAT%20CIV.pdf is the cable for the Omni
VI
>
> Its a mini stereo at the Mucirham end and a mono mini at the TT end
>
> For the other MH units look under "support"
>
> 73 Fred
> G4BWP
>