[Dxbase] MicroKEYER problem

[Chuck Guenther]

"But if I have keyer 
on when I start DXBase, or I use keyer configuration screen, DXBase 
disables the speed knob (which I always use to adjust my speed)"

I believe this is normal operation for the K1EL WinKey contained in the microKeyer-- the software program takes over the speed control.  I very rarely use the speed pot, as I prefer to use the features in DXBase to control the keyer speed.

As far as the PTT function goes, you might try changing the setting for "pin 5" of the WinKey (Tools, Options, CW options, WinKey options, pin 5 config).

73,

Chuck NI0C