[Dx4win] DX4WIN

[Tim moore]

And with that configuration, using a USB port as a serial port, you'll need
to go into that port in Windows and make sure you have it set to be a
virtual serial port with the settings that match.

Tim Moore

On Wed, Dec 19, 2018, 3:14 PM Steve Hart <k8ej at charter.net wrote:

> Using Win 10 current version,  Yaesu FTdx5000, and cannot get them to talk
> to each other.  Using the serial port on the 5000, an RT Systems USB-63
> cable w/the FD-11 chipset, and a USB connector on the other end.   I’m
> assuming I have a comport assignment problem.  Is there a specific comport
> number, speed,etc that I should be using for each?  Tnx/73  Steve
> k8ej at charter.net
> ______________________________________________________________
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN at mailman.qth.net
> Message delivered to redvalk56 at gmail.com
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html