[Dx4win] DX4WIN

[Tim moore]

Yes to a specific comm Port....the one that matches the comm Port you are
using to connect from your PC/ laptop to your radio. Yes to a specific data
rate/ speed...the one you have set in the ftdx 5000 menu ( I use 38400,
which is supported in my ftdx 3000 menu and I'm sure is also on your
5000.... under the heading of cat rate). You also have to match either DTR
or CTS....I think it's DTR bit I'll have to check. Probably should be set
to high most likely.

Tim Moore/K4TK

On Wed, Dec 19, 2018, 3:14 PM Steve Hart <k8ej at charter.net wrote:

> Using Win 10 current version,  Yaesu FTdx5000, and cannot get them to talk
> to each other.  Using the serial port on the 5000, an RT Systems USB-63
> cable w/the FD-11 chipset, and a USB connector on the other end.   I’m
> assuming I have a comport assignment problem.  Is there a specific comport
> number, speed,etc that I should be using for each?  Tnx/73  Steve
> k8ej at charter.net
> ______________________________________________________________
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN at mailman.qth.net
> Message delivered to redvalk56 at gmail.com
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html