[Dx4win] DX4WIN v8.05 Radio Preferences Settings [ADDENDUM]

[Kostas SV1DPI]

I don't own a 775 (even I would like to have one hi hi). Please see the 
manual page 48.

I think it is menu 15,16,17,18. Put the in default except baud rate (it 
is by default auto, put it in 1200). Please see also if in menu 15 
address is 46H.

...73 de Kostas SV1DPI
   (One of SZ1A-EP6T)

On 22/1/2017 1:37 πμ, Kenneth Leon wrote:
> ADDENDUM from NE6AA (I was unable to upload a screen shot of the DX4WIN Radio Settings due to message size limitation):
>
> DX4WIN v8.05
>
> BEGIN DIALOG BOX
>
> "File, Preferences, Radio tab:
>
> Radio One Settings (These settings work for CAT control)
>
> Type: Yaesu FT2000; Address: 00; Baud Rate: 4800
> Notes for radio: None
> Com Port: COM3; Poll rate (MS): 5000; Max tries: 6; DTR High: Checked
> Transverter Offset (KHz): 0; RTS High: Unchecked; Band: All bands
>
> Radio Two Settings: (These settings DO NOT WORK for CAT control)
>
> Type: ICOM 775; Address: 46; Baud Rate: 1200
> Notes for radio: Also 756; selects narrow filters
> Com Port: COM5; Poll Rate (ms): 5000; Max tries: 6 DTR High: Checked
> Transverter Offset (KHz): 0; RTS High: Unchecked; Band: All bands"
>
> END DIALOG BOX
>
> Will greatly appreciate a Fix for the IC-775DSP rig settings to gain CAT control in DX4WIN v 8.05.
>
> 73,
>
> Ken, NE6AA
> 760-536-3123 main
> 951-515-6960 mobile
> kenl at msn.com<mailto:kenl at msn.com>
>
> From: Kenneth Leon [mailto:kenl at msn.com]
> Sent: Saturday, January 21, 2017 9:55 AM
> To: DX4WIN at mailman.qth.net
> Cc: Kenneth Leon
> Subject: FW: DX4WIN v8.0.5 Radio Preferences Settings
>
>
> NE6AA here. I have a question on my DX4WIN v8.0.5 Preferences, in particular under File, Preferences, and Radio Settings for Second Radio (IC-775DSP).  "First Radio" is FT-2000D with good CAT control via COM 3; "Second Radio" is IC-775DSP with good CAT control in Fldigi and HRD apps on COM 5, but no CAT control in DX4WIN .
>
> IC-775 will not follow CAT control from USB-Serial connection on COM 5. DX4WIN hangs up and displays "Radio timed out. Radio interface has been disabled" I am able to enter QSO data in Non-Real Time mode, but there is no CAT following.
>
> Need help to adjust my settings for the 775 as shown on this screen shot. I have swapped First and Second Radio in File, Preferences, Radio settings with no success on the IC-775.
>
> I have tried a check-mark in "RTS High" on Second Radio without success. I believe the Address and Baud Rate settings are correct.
>
> DX4WIN is not taking my Second Radio setting for CAT control. Thanks in advance for your inputs!
>
> 73,
>
> Ken, NE6AA
> 760-536-3123 main
> 951-515-6960 mobile
> kenl at msn.com<mailto:kenl at msn.com>
> ______________________________________________________________
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html