[Dx4win] DX4WIN v8.05 Radio Preferences Settings [ADDENDUM]

[Kenneth Leon]

ADDENDUM from NE6AA (I was unable to upload a screen shot of the DX4WIN Radio Settings due to message size limitation):

DX4WIN v8.05

BEGIN DIALOG BOX

"File, Preferences, Radio tab:

Radio One Settings (These settings work for CAT control)

Type: Yaesu FT2000; Address: 00; Baud Rate: 4800
Notes for radio: None
Com Port: COM3; Poll rate (MS): 5000; Max tries: 6; DTR High: Checked
Transverter Offset (KHz): 0; RTS High: Unchecked; Band: All bands

Radio Two Settings: (These settings DO NOT WORK for CAT control)

Type: ICOM 775; Address: 46; Baud Rate: 1200
Notes for radio: Also 756; selects narrow filters
Com Port: COM5; Poll Rate (ms): 5000; Max tries: 6 DTR High: Checked
Transverter Offset (KHz): 0; RTS High: Unchecked; Band: All bands"

END DIALOG BOX

Will greatly appreciate a Fix for the IC-775DSP rig settings to gain CAT control in DX4WIN v 8.05.

73,

Ken, NE6AA
760-536-3123 main
951-515-6960 mobile
kenl at msn.com<mailto:kenl at msn.com>

From: Kenneth Leon [mailto:kenl at msn.com]
Sent: Saturday, January 21, 2017 9:55 AM
To: DX4WIN at mailman.qth.net
Cc: Kenneth Leon
Subject: FW: DX4WIN v8.0.5 Radio Preferences Settings


NE6AA here. I have a question on my DX4WIN v8.0.5 Preferences, in particular under File, Preferences, and Radio Settings for Second Radio (IC-775DSP).  "First Radio" is FT-2000D with good CAT control via COM 3; "Second Radio" is IC-775DSP with good CAT control in Fldigi and HRD apps on COM 5, but no CAT control in DX4WIN .

IC-775 will not follow CAT control from USB-Serial connection on COM 5. DX4WIN hangs up and displays "Radio timed out. Radio interface has been disabled" I am able to enter QSO data in Non-Real Time mode, but there is no CAT following.

Need help to adjust my settings for the 775 as shown on this screen shot. I have swapped First and Second Radio in File, Preferences, Radio settings with no success on the IC-775.

I have tried a check-mark in "RTS High" on Second Radio without success. I believe the Address and Baud Rate settings are correct.

DX4WIN is not taking my Second Radio setting for CAT control. Thanks in advance for your inputs!

73,

Ken, NE6AA
760-536-3123 main
951-515-6960 mobile
kenl at msn.com<mailto:kenl at msn.com>