[Dx4win] DX4WIN v8.05 Radio Preferences Settings [ADDENDUM]

[Megin Murphy]

Ken, 

These are the settings I have for my 775DSP.  I'll show your settings then mine:

Type: 	ICOM 775				ICOM 775
Address: 46					46 (the Default box under this field is checked)
Baud Rate: 1200 				9600
Notes for radio: Also 756; selects narrow filters 	Also 756; selects narrow filters
Com Port: COM5				COM5
Poll Rate (ms): 5000				5000
Max tries: 6					6
DTR High: Checked				Checked
Transverter Offset (KHz): 0			0
RTS High: Unchecked				Checked
Band: All bands					All bands

Hope this helps.

73, Megin, K5IJ

-----Original Message-----
From: DX4WIN [mailto:dx4win-bounces at mailman.qth.net] On Behalf Of Kostas SV1DPI
Sent: Sunday, January 22, 2017 12:53 AM
To: dx4win at mailman.qth.net
Subject: Re: [Dx4win] DX4WIN v8.05 Radio Preferences Settings [ADDENDUM]

I don't own a 775 (even I would like to have one hi hi). Please see the manual page 48.

I think it is menu 15,16,17,18. Put the in default except baud rate (it is by default auto, put it in 1200). Please see also if in menu 15 address is 46H.

...73 de Kostas SV1DPI
   (One of SZ1A-EP6T)

On 22/1/2017 1:37 πμ, Kenneth Leon wrote:
> ADDENDUM from NE6AA (I was unable to upload a screen shot of the DX4WIN Radio Settings due to message size limitation):
>
> DX4WIN v8.05
>
> BEGIN DIALOG BOX
>
> "File, Preferences, Radio tab:
>
> Radio One Settings (These settings work for CAT control)
>
> Type: Yaesu FT2000; Address: 00; Baud Rate: 4800 Notes for radio: None 
> Com Port: COM3; Poll rate (MS): 5000; Max tries: 6; DTR High: Checked 
> Transverter Offset (KHz): 0; RTS High: Unchecked; Band: All bands
>
> Radio Two Settings: (These settings DO NOT WORK for CAT control)
>
> Type: ICOM 775; Address: 46; Baud Rate: 1200 Notes for radio: Also 
> 756; selects narrow filters Com Port: COM5; Poll Rate (ms): 5000; Max 
> tries: 6 DTR High: Checked Transverter Offset (KHz): 0; RTS High: 
> Unchecked; Band: All bands"
>
> END DIALOG BOX
>
> Will greatly appreciate a Fix for the IC-775DSP rig settings to gain CAT control in DX4WIN v 8.05.
>
> 73,
>
> Ken, NE6AA
> 760-536-3123 main
> 951-515-6960 mobile
> kenl at msn.com<mailto:kenl at msn.com>
>
> From: Kenneth Leon [mailto:kenl at msn.com]
> Sent: Saturday, January 21, 2017 9:55 AM
> To: DX4WIN at mailman.qth.net
> Cc: Kenneth Leon
> Subject: FW: DX4WIN v8.0.5 Radio Preferences Settings
>
>
> NE6AA here. I have a question on my DX4WIN v8.0.5 Preferences, in particular under File, Preferences, and Radio Settings for Second Radio (IC-775DSP).  "First Radio" is FT-2000D with good CAT control via COM 3; "Second Radio" is IC-775DSP with good CAT control in Fldigi and HRD apps on COM 5, but no CAT control in DX4WIN .
>
> IC-775 will not follow CAT control from USB-Serial connection on COM 5. DX4WIN hangs up and displays "Radio timed out. Radio interface has been disabled" I am able to enter QSO data in Non-Real Time mode, but there is no CAT following.
>
> Need help to adjust my settings for the 775 as shown on this screen shot. I have swapped First and Second Radio in File, Preferences, Radio settings with no success on the IC-775.
>
> I have tried a check-mark in "RTS High" on Second Radio without success. I believe the Address and Baud Rate settings are correct.
>
> DX4WIN is not taking my Second Radio setting for CAT control. Thanks in advance for your inputs!
>
> 73,
>
> Ken, NE6AA
> 760-536-3123 main
> 951-515-6960 mobile
> kenl at msn.com<mailto:kenl at msn.com>
> ______________________________________________________________
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN at mailman.qth.net
>
> This list hosted by: http://www.qsl.net Please help support this email 
> list: http://www.qsl.net/donate.html

______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html