[Dx4win] SignaLink USB

[Joe Giacobello]

Jim, let me look at it again.  It's been so long that my recollection is 
dim.

Thanks for your suggestions.

73, Joe

Jim Reisert AD1C wrote:
> If I recall correctly, in the PSK window, there's a way to right-click
> somewhere to change the settings.  This lets you set the sound card
> for PSK (by sound card #).  I don't remember exactly how, or how this
> would apply to RTTY.
>
> Remember that -1 is the default system soundcard.  The built-in card
> would usually be 0 (so either -1 or 0 works).  Then additional cards
> would be 1, 2, 3 etc.
>
> On Wed, May 27, 2009 at 4:50 PM, Joe Giacobello <k2xx at swva.net> wrote:
>
>   
>> Mel and others, I have had an almost identical problem.  I am using an
>> external USB sound card for the digital modes, and I had wanted to also
>> use the internal sound card on my motherboard for DX announcements and
>> other computer applications.  I tried any number of settings in the
>> control panel 's SOUNDS menu in which either the internal card was
>> declared, the external card was declared or one was declared for voice
>> and the other for audio and vice versa.  I could never get both cards to
>> work simultaneously.  I finally gave up and use the external card for
>> the digital modes and forgo all other computer sound sources.
>>
>> The external card is declared in the control panel and I have selected
>> card number 0 in the DX4WIN preferences.  If I declare the internal card
>> in the control panel, then it works and the external card doesn't even
>> when I switch DX4WIN to card 1 for the digital modes.  It's been a long
>> time since I played with these parameters, so my recollections are now a
>> little dim, but if anyone has any suggestions to get them both working,
>> I'd sure like to hear about them.
>>
>> 73, Joe
>> K2XX
>>     
>
>