[Dx4win] SignaLink USB

[Mel]

That's how it is set up here. Set up the default card in Control Panel 
for Windows noise and announcements and set PSK sound card to whatever 
in Preferences - Control. In my case a PCI sound card was "Card 1"... 
but I figured that out by trial and error.  BTW, you need a relatively 
recent version of DX4Win... at one time it only used the default card. 
I'm not sure when Paul added this enhancement.

Joe Giacobello wrote:
> Mel and others, I have had an almost identical problem.  I am using an 
> external USB sound card for the digital modes, and I had wanted to also 
> use the internal sound card on my motherboard for DX announcements and 
> other computer applications.  I tried any number of settings in the 
> control panel 's SOUNDS menu in which either the internal card was 
> declared, the external card was declared or one was declared for voice 
> and the other for audio and vice versa.  I could never get both cards to 
> work simultaneously.  I finally gave up and use the external card for 
> the digital modes and forgo all other computer sound sources.
> The external card is declared in the control panel and I have selected 
> card number 0 in the DX4WIN preferences.  If I declare the internal card 
> in the control panel, then it works and the external card doesn't even 
> when I switch DX4WIN to card 1 for the digital modes.  It's been a long 
> time since I played with these parameters, so my recollections are now a 
> little dim, but if anyone has any suggestions to get them both working, 
> I'd sure like to hear about them.
> 
> 73, Joe
> K2XX
> 
> 
> 
> Mel wrote:
>> OK.., then you have proven that the card works from DX4Win. I suspect 
>> that when you are using card 1,2 or 3 you have not set the mixer 
>> application correctly. I think Jim is correct, it should be card 1... 
>> I have 2 sound cards and that is what I use...
>>
>> If you have WSPR... if you run it, it will display the audio devices 
>> on startup and you can see how they are enumerated.
>>
>> Paul... could you please display some meaningful text instead of Card 
>> 1,2,3,4 in ver 8, if possible?
>>
>> Please do not use it the way it is configured now Al... I already hear 
>> too many Windows noises on 14.07 ;-) If you do, disable the Windows 
>> sound theme.
>>
>> Mel...
>>
>> Alan Walters wrote:
>>  
>>> Thanks to Jim, Kostas and Mel.
>>>
>>>  
>>>
>>> I tried Card 0, 1, 2, and 3 with no success.  So I returned to Control
>>> Panel/Sounds and Audio Devices/Audio and Changed the Default sound 
>>> card to
>>> "USB Audio CODEX".  Then returned to DX4Win and selected Default.  
>>> All works
>>> OK now except no DX announcements - a secondary consideration - in 
>>> fact I
>>> needed to change Preferences/Packet1/DX Alerts to "None" to prevent a 
>>> spot
>>> from keying the radio.
>>>
>>>  
>>>
>>> I will leave well enough alone for now but still want to see if I can 
>>> get
>>> the USB soundcard to work using the Card selections other than 
>>> Default.  But
>>> for now all is OK.  Thanks again to Jim, Kostas and Mel.
>>>
>>>  
>>>
>>> 73, de Al - K5NOF SK
>>>
>>> ______________________________________________________________
>>> Dx4win mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/dx4win
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Dx4win at mailman.qth.net
>>>
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>>
>>>     
>> ______________________________________________________________
>> Dx4win mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/dx4win
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Dx4win at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
>>
>>   
>