[Dx4win] SignaLink USB

[Jim Reisert AD1C]

If I recall correctly, in the PSK window, there's a way to right-click
somewhere to change the settings.  This lets you set the sound card
for PSK (by sound card #).  I don't remember exactly how, or how this
would apply to RTTY.

Remember that -1 is the default system soundcard.  The built-in card
would usually be 0 (so either -1 or 0 works).  Then additional cards
would be 1, 2, 3 etc.

On Wed, May 27, 2009 at 4:50 PM, Joe Giacobello <k2xx at swva.net> wrote:

> Mel and others, I have had an almost identical problem.  I am using an
> external USB sound card for the digital modes, and I had wanted to also
> use the internal sound card on my motherboard for DX announcements and
> other computer applications.  I tried any number of settings in the
> control panel 's SOUNDS menu in which either the internal card was
> declared, the external card was declared or one was declared for voice
> and the other for audio and vice versa.  I could never get both cards to
> work simultaneously.  I finally gave up and use the external card for
> the digital modes and forgo all other computer sound sources.
>
> The external card is declared in the control panel and I have selected
> card number 0 in the DX4WIN preferences.  If I declare the internal card
> in the control panel, then it works and the external card doesn't even
> when I switch DX4WIN to card 1 for the digital modes.  It's been a long
> time since I played with these parameters, so my recollections are now a
> little dim, but if anyone has any suggestions to get them both working,
> I'd sure like to hear about them.
>
> 73, Joe
> K2XX

-- 
Jim Reisert AD1C/Ø, <jjreisert at alum.mit.edu>, http://www.ad1c.us