[Dx4win] 7.06 won't set split on K3

[Robert Naumann]

I looked through the archives, and I did not see a response to Steve's
question below.

I am seeing exact same behavior on my K3 now too. Using 7.07.02.

With split being turned off for no reason, it makes one a lid very quickly
in a split pileup situation.

Is there a resolution to this?

73,

Bob W5OV

-----Original Message-----
From: dx4win-bounces at mailman.qth.net [mailto:dx4win-bounces at mailman.qth.net]
On Behalf Of inventor_sixty_one
Sent: Monday, December 08, 2008 9:59 PM
To: Dx4win at mailman.qth.net
Subject: [Dx4win] 7.06 won't set split on K3

I wonder what I am doing wrong ... in either the manual 'set
frequency' tool, or by selecting a DX spot that is set for split VFO
mode, the 'split' indicator on the K3 is activated ... but does not
stay in that mode.  It just 'clicks' to split mode for a moment and
then reverts to VFO A mode.

manually going into split mode on the radio works fine.

I have tried this at both 4800 and 38400 bps speeds, to see if that
made any difference.  None.

Ideas?

Steve KZ1X/4
_______________________________________________
Dx4win mailing list
Dx4win at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/dx4win