[Dx4win] 7.06 won't set split on K3

[Bob Thompson - N9SF]

This might might get it going for you.

Download and install DX4WIN 7.07.

Use the "Elecraft K3 X4" rig file that downloads with version 7.07.

If you are using LP_Bridge, I have found that something gets out of 
whack with it at times.  When LP_Bridge gets off track, modes on VFO 
B and split can be wrong after double clicking a DX spot.  Restarting 
LP_Bridge seems to correct the problem.

I hope this helps.

73,
Bob - N9SF



At 08:27 AM 2/3/2009, Robert Naumann wrote:
>I looked through the archives, and I did not see a response to Steve's
>question below.
>
>I am seeing exact same behavior on my K3 now too. Using 7.07.02.
>
>With split being turned off for no reason, it makes one a lid very quickly
>in a split pileup situation.
>
>Is there a resolution to this?
>
>73,
>
>Bob W5OV
>
>-----Original Message-----
>From: dx4win-bounces at mailman.qth.net [mailto:dx4win-bounces at mailman.qth.net]
>On Behalf Of inventor_sixty_one
>Sent: Monday, December 08, 2008 9:59 PM
>To: Dx4win at mailman.qth.net
>Subject: [Dx4win] 7.06 won't set split on K3
>
>I wonder what I am doing wrong ... in either the manual 'set
>frequency' tool, or by selecting a DX spot that is set for split VFO
>mode, the 'split' indicator on the K3 is activated ... but does not
>stay in that mode.  It just 'clicks' to split mode for a moment and
>then reverts to VFO A mode.
>
>manually going into split mode on the radio works fine.
>
>I have tried this at both 4800 and 38400 bps speeds, to see if that
>made any difference.  None.
>
>Ideas?
>
>Steve KZ1X/4
>_______________________________________________
>Dx4win mailing list
>Dx4win at mailman.qth.net
>http://mailman.qth.net/mailman/listinfo/dx4win
>
>______________________________________________________________
>Dx4win mailing list
>Home: http://mailman.qth.net/mailman/listinfo/dx4win
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Dx4win at mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html