[Dx4win] IC706mk11G

[Joe Giacobello]

Andy, make sure the CI-V address (Menu Item 34) is set to 58.  There's 
an error in the manual implying that it's 4E and your unit may have 
defaulted to that.

73, Joe
K2XX

Andy Hewitt wrote:
> Hi all,
>   Can any one help with setting up an IC706mkIIG to talk to DX4Win? It used to work FB but suffered damage from a nearby electrical discharge. It was returned to ICOM for repair and is working OK but I cannot get it to work with DX4Win. I am using the same set-up as before witha MicroHam USB interface. The discharge blew up the processor which was changed so all the settings reverted to factory defaults. I have been going through them all on the menus and getting them back to what I want but cannot get the rig/PC to talk. When I try to "start radio" I get a message saying "ie_open - device already open" as if another program is using the port. I have tried changing the port although this is theway things were set up previously.
>    
>   Any help would be appreciated
>   73
>   Andy G3SVD ( currently XE1/G3SVD)
> _______________________________________________
> Dx4win mailing list
> Dx4win at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/dx4win
>
>
>