[Dx4win] PSK31 Menu Problem

Fri, 16 Jan 2004 15:05:39 -0500

No it's changed... The options under TX are checkboxes for Net and Use
CW Control

6.02 doesn't allow a separate COM port for PSK31 PTT control... It uses
the CW PTT. This suits me just fine, but apparently it creates problems
for others...

> -----Original Message-----
> From: [email protected] 
> [mailto:[email protected]] On Behalf Of Joe Giacobello
> Sent: January 16, 2004 14:44
> To: Mel
> Cc: DX4WIN
> Subject: Re: [Dx4win] PSK31 Menu Problem
> 
> 
> Mel, thanks for your help, and you were partially correct.  
> By reducing 
> the font size from 9 to 6, I was able to have the tab headings show 
> their proper labels.  However, I still don't get the options that the 
> manual says I should.  The manual says than under "TX" I should get a 
> the options for "NET" and "TX Keying".  "TX Keying" then should have 
> check boxes in a submenu for "VOX," "CW Interface" and 
> "Serial Ports 1 
> thru 8".  I get no "TX  Keying" option at all!  I get instead a check 
> box for "Use CW Control".  Something is haywire here, because I can't 
> select the COM port for my interface.
> 
> I should add that I am using version 6.02 and my manual is 
> for 6.0.  I 
> am not aware of any updates for the manual.
> 
> Thanks again.
> 
> 73, Joe
> 
> Mel wrote:
> 
> >Check the font selections in screen preferences...
> >
> >  
> >
> >>-----Original Message-----
> >>From: [email protected]
> >>[mailto:[email protected]] On Behalf Of Joe Giacobello
> >>Sent: January 15, 2004 17:06
> >>To: DX4WIN
> >>Subject: [Dx4win] PSK31 Menu Problem
> >>
> >>
> >>I have a very mysterious problem when I try to adjust the TX
> >>(transmit 
> >>parameters) settings in the PSK31 window.  First of all, the 
> >>tabs across 
> >>the top of the Settings window is blank; there are no names 
> >>on the tabs. 
> >>However,  except for the TX tab, they all do respond properly 
> >>with the 
> >>expected options.when they are selected.  In the case of 
> the TX tab, 
> >>some options seem to be absent.  The "TX frequency, "" Net" and "CW 
> >>control" options are visible, but there is no "TX keying" option as 
> >>described in the manual.  As a consequence, I'm unable to 
> >>select a COM 
> >>port for my interface.  I've reread the manual and the Help files 
> >>several times without success.  Does anyone have any insight here?
> >>
> >>Thanks and 73 de Joe
> >>
> >>_______________________________________________
> >>Dx4win mailing list
> >>[email protected] 
> http://mailman.qth.net/mailman/listinfo/dx4win
> >>
> >>    
> >>
> >
> >
> >
> >  
> >
> 
> 
> --- StripMime Report -- processed MIME parts --- multipart/alternative
>   text/plain (text body -- kept)
>   text/html
> The reason this message is shown is because the post was in 
> HTML or had an attachment.  Attachments are not allowed.  To 
> learn how to post in Plain-Text go to: 
> http://www.expita.com/nomime.html  --- 
> _______________________________________________
> Dx4win mailing list
> [email protected] http://mailman.qth.net/mailman/listinfo/dx4win
> 