[Dx4win] PSK31 Menu Problem

[Joe Giacobello]

Mel, thanks for your help, and you were partially correct.  By reducing 
the font size from 9 to 6, I was able to have the tab headings show 
their proper labels.  However, I still don't get the options that the 
manual says I should.  The manual says than under "TX" I should get a 
the options for "NET" and "TX Keying".  "TX Keying" then should have 
check boxes in a submenu for "VOX," "CW Interface" and "Serial Ports 1 
thru 8".  I get no "TX  Keying" option at all!  I get instead a check 
box for "Use CW Control".  Something is haywire here, because I can't 
select the COM port for my interface.

I should add that I am using version 6.02 and my manual is for 6.0.  I 
am not aware of any updates for the manual.

Thanks again.

73, Joe

Mel wrote:

>Check the font selections in screen preferences...
>
>  
>
>>-----Original Message-----
>>From: dx4win-admin@mailman.qth.net 
>>[mailto:dx4win-admin@mailman.qth.net] On Behalf Of Joe Giacobello
>>Sent: January 15, 2004 17:06
>>To: DX4WIN
>>Subject: [Dx4win] PSK31 Menu Problem
>>
>>
>>I have a very mysterious problem when I try to adjust the TX 
>>(transmit 
>>parameters) settings in the PSK31 window.  First of all, the 
>>tabs across 
>>the top of the Settings window is blank; there are no names 
>>on the tabs. 
>>However,  except for the TX tab, they all do respond properly 
>>with the 
>>expected options.when they are selected.  In the case of the TX tab, 
>>some options seem to be absent.  The "TX frequency, "" Net" and "CW 
>>control" options are visible, but there is no "TX keying" option as 
>>described in the manual.  As a consequence, I'm unable to 
>>select a COM 
>>port for my interface.  I've reread the manual and the Help files 
>>several times without success.  Does anyone have any insight here?
>>
>>Thanks and 73 de Joe
>>
>>_______________________________________________
>>Dx4win mailing list
>>Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
>>
>>    
>>
>
>
>
>  
>


--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment.  Attachments are not allowed.  To learn how
to post in Plain-Text go to: http://www.expita.com/nomime.html  ---