[Dx4win] PSK31 Menu Problem

Fri, 16 Jan 2004 16:38:24 -0500

Tnx, Mel.  At least you saved me from wasting more time.

73, Joe

Mel wrote:

>No it's changed... The options under TX are checkboxes for Net and Use
>CW Control
>
>6.02 doesn't allow a separate COM port for PSK31 PTT control... It uses
>the CW PTT. This suits me just fine, but apparently it creates problems
>for others...
>
>  
>
>>-----Original Message-----
>>From: [email protected] 
>>[mailto:[email protected]] On Behalf Of Joe Giacobello
>>Sent: January 16, 2004 14:44
>>To: Mel
>>Cc: DX4WIN
>>Subject: Re: [Dx4win] PSK31 Menu Problem
>>
>>
>>Mel, thanks for your help, and you were partially correct.  
>>By reducing 
>>the font size from 9 to 6, I was able to have the tab headings show 
>>their proper labels.  However, I still don't get the options that the 
>>manual says I should.  The manual says than under "TX" I should get a 
>>the options for "NET" and "TX Keying".  "TX Keying" then should have 
>>check boxes in a submenu for "VOX," "CW Interface" and 
>>"Serial Ports 1 
>>thru 8".  I get no "TX  Keying" option at all!  I get instead a check 
>>box for "Use CW Control".  Something is haywire here, because I can't 
>>select the COM port for my interface.
>>
>>I should add that I am using version 6.02 and my manual is 
>>for 6.0.  I 
>>am not aware of any updates for the manual.
>>
>>Thanks again.
>>
>>73, Joe
>>
>>Mel wrote:
>>
>>    
>>
>>>Check the font selections in screen preferences...
>>>
>>> 
>>>
>>>      
>>>
>>>>-----Original Message-----
>>>>From: [email protected]
>>>>[mailto:[email protected]] On Behalf Of Joe Giacobello
>>>>Sent: January 15, 2004 17:06
>>>>To: DX4WIN
>>>>Subject: [Dx4win] PSK31 Menu Problem
>>>>
>>>>
>>>>I have a very mysterious problem when I try to adjust the TX
>>>>(transmit 
>>>>parameters) settings in the PSK31 window.  First of all, the 
>>>>tabs across 
>>>>the top of the Settings window is blank; there are no names 
>>>>on the tabs. 
>>>>However,  except for the TX tab, they all do respond properly 
>>>>with the 
>>>>expected options.when they are selected.  In the case of 
>>>>        
>>>>
>>the TX tab, 
>>    
>>
>>>>some options seem to be absent.  The "TX frequency, "" Net" and "CW 
>>>>control" options are visible, but there is no "TX keying" option as 
>>>>described in the manual.  As a consequence, I'm unable to 
>>>>select a COM 
>>>>port for my interface.  I've reread the manual and the Help files 
>>>>several times without success.  Does anyone have any insight here?
>>>>
>>>>Thanks and 73 de Joe
>>>>
>>>>_______________________________________________
>>>>Dx4win mailing list
>>>>[email protected] 
>>>>        
>>>>
>>http://mailman.qth.net/mailman/listinfo/dx4win
>>    
>>
>>>>   
>>>>
>>>>        
>>>>
>>>
>>> 
>>>
>>>      
>>>
>>--- StripMime Report -- processed MIME parts --- multipart/alternative
>>  text/plain (text body -- kept)
>>  text/html
>>The reason this message is shown is because the post was in 
>>HTML or had an attachment.  Attachments are not allowed.  To 
>>learn how to post in Plain-Text go to: 
>>http://www.expita.com/nomime.html  --- 
>>_______________________________________________
>>Dx4win mailing list
>>[email protected] http://mailman.qth.net/mailman/listinfo/dx4win
>>
>>    
>>
>
>_______________________________________________
>Dx4win mailing list
>[email protected]
>http://mailman.qth.net/mailman/listinfo/dx4win
>
>
>  
>

--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment.  Attachments are not allowed.  To learn how
to post in Plain-Text go to: http://www.expita.com/nomime.html  ---