[DSP-10] EZFAST Loading Problem Solved

[PTSMANTUA at aol.com]

To Mike, Perry and the group who replied,

My sincere thanks as your ideas and files where helpful in the resolution of 
my problem.

My DSP-10 is back on the air!

Turns out there is a problem with the COMM2 port on this DOS box (Bought it 
used).
With some effort COMM1 now supports the DSP-10 Just fine.

Summary if it helps the next person;

(1) EZLD       The old SLOW program is slow but sure. Helpful to slow things 
down and make sure things are working. I issued a Mode command (see below) to 
set the port, but that may NOT be needed.

(2) EZFAST works also. A Pause between the load of UHF3 and UHFA is a nice 
addition to the bat file for loading as it allows any errors to be displayed 
long enough for you to read them. (Thanks Mike)

(3) MODE Baud=9600 Parity=n, Stop =1 Data=2 was used before I issued EZLD 1 
UHF3 G, but may not be needed after some final testing.

(4) A suggestion to just stick a EEPORM in may make sense. I have resisted it 
in the vain hope I would someday return to the program and tinker...

Many new features to play with... Where to start (Hmmm...)
Thanks to all

de Phil

KF8JW