[DSP-10] DSP-10 Completion

[dsp-10@mailman.qth.net]

Hi Dick,

You and I have something going here without the use of radio or the internet. 
 I've been out in the garage playing with my DSP-10 all morning and I decided 
to come in and see if I could find a new command summary.  Your message was 
the first thing I found when I logged on to the net!

I did the crystal filter alignment this morning according to Bob's 
instructions and it turned out well.  I found out the DSP-10 will drive my 
old Johnson 6N2 that I have been using as a linear to about 10 watts output 
(and I have a 6 db attenuator on the input)!  I have been getting 50 watts 
out of it when driven by my HB 2M transverter which I had always thought had 
around .25 to .5 watts output.  It's obviously got a little less output than 
I thought.  I have a total of three home made RF probes and none of them show 
the DSP-10 with as much as 20 mw output but I think it has at least that 
much.  I need to build a decent low power indicator.

Many thanks again for the summary sheet.

de Jess - W4MVB


--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment. Attachments are not allowed.
Please post in Plain-Text only.---