[DSP-10] DSP-10 Completion

[Richard Ewing]

FB es GL..

At 12:53 PM 8/4/2002 -0400, you wrote:
>Hi Dick,
>
>You and I have something going here without the use of radio or the internet.
>  I've been out in the garage playing with my DSP-10 all morning and I 
> decided
>to come in and see if I could find a new command summary.  Your message was
>the first thing I found when I logged on to the net!
>
>I did the crystal filter alignment this morning according to Bob's
>instructions and it turned out well.  I found out the DSP-10 will drive my
>old Johnson 6N2 that I have been using as a linear to about 10 watts output
>(and I have a 6 db attenuator on the input)!  I have been getting 50 watts
>out of it when driven by my HB 2M transverter which I had always thought had
>around .25 to .5 watts output.  It's obviously got a little less output than
>I thought.  I have a total of three home made RF probes and none of them show
>the DSP-10 with as much as 20 mw output but I think it has at least that
>much.  I need to build a decent low power indicator.
>
>Many thanks again for the summary sheet.
>
>de Jess - W4MVB
>
>
>--- StripMime Report -- processed MIME parts ---
>multipart/alternative
>   text/plain (text body -- kept)
>   text/html
>The reason this message is shown is because the post was in HTML
>or had an attachment. Attachments are not allowed.
>Please post in Plain-Text only.---
>_______________________________________________
>DSP-10 mailing list
>DSP-10@mailman.qth.net
>http://mailman.qth.net/mailman/listinfo/dsp-10