[CVRC] More antenna stuff FS

[Jack/W6NF]

If anyone wants to share with other reflectors, if appropriate, my posts 
for all the antenna stuff for sale it would be appreciated.

More antenna stuff FS:

Tubing:

1) 5/16” OD x 12', gold anodized. $5.00 each

Coax cable:

1) 7/8' Heliax, about 25 feet with N-Male on one end, $5.00
2) 7/8' Heliax, about 50 feet with SO-239 on one end, $15.00
3) ¾' 75-ohm CATV hardline, at least 175 feet, no connectors. Great for 
receive antenna applications where lack of connectors is not a problem, 
$20.00
4) Cable Xperts CXP1318FX (similar to LMR-400), 160+ feet, PL-259 on 
each end. $70.00
5) Cable Xperts CXP1318FX (similar to LMR-400), 150+ feet, PL-259 on 
each end. $65.00
6) Cable Xperts CXP1318FX (similar to LMR-400), 120+ feet, PL-259 on 
each end. $50.00
7) Cable Xperts CXP1318FX (similar to LMR-400), 120+ feet, PL-259 on 
each end. $50.00

Note that these prices are about 40% of the cable's current price 
connector cost when connector cost is factored in. All cable is about 
one year old.

8) 2-meter driven element, K1FO design, $10.00
9) 222MHz 5-element HB rover yagi. Driven element must be completed. $5.00
10) 432MHz 5-element HB rover yagi. Driven element must be completed. $5.00
11) 1296 HB loop yagi parts. Enough to build at least a 33-element loop 
yagi. Includes driven element with female N-connector, additional hollow 
brass screws for building more driven elements, pieces of semi-rigid 
coax that fit through the hollow screws and pre-cut and drilled 
parasitic elements. Driven element characterized on a network analyzer 
at minimum 17db return loss. $20.00 for all. (I have suitable boom 
material available for this antenna)
12) 1296 HB folded dipole driven element with low loss coax and N-male 
connector attached. Driven element characterized on a network analyzer 
at minimum 17db return loss. $5.00
13) 10-meter driven element, which I believe is an M-Squared design. 
Missing phasing line which uses “F” style connectors. $5.00
14) 15-meter 3-element yagi built from Telrex Long-John parts. 
Disassembled and ready to transport, $25.00
15) 20-meter 2-element yagi built from Telrex Long-John parts. 
Disassembled and ready to transport, $25.00
16) Galvanized steel mast, 2' OD, 1/8' wall, 11' 10” long. Used to 
support the 40-meter yagi at K7AO here in Silver Springs. $25.00
17) Steel mast, 2' OD, 1/8' wall, 11' long. The rotor end has a sleeve 
that makes the wall thickness ¼' but I cannot tell how deep that sleeve 
goes. $15.00

All items pick up in Silver Springs, NV. Any questions, or for 
directions, call 775-997-8129

Thanks,

Jack, W6NF