[CVRC] FS--Antenna Material and desks

[Jack/W6NF]

If anyone still does antenna construction...

I have the following aluminum antenna material available. All sizes are 
outside diameter and tubing is .065" wall thickness. Numbers in 
parenthesis indicates quantity available:

Rod:

1) 3/16" x 6' (2)

Tubing:

1) 1/4" x 4' (9)
2) 3/8" x 6' 6" (2)
3) 3/8" x 6' (6)
4) ½' x 6' (2)
5) 5/8" x 3' 5" (tapers to 1/2" on one end) (1)
6) 3/4" x 3' 4" (1)
7) 7/8" x 3' (1)
8) 7/8" x 3' 8" (1)
9) 1" x 3' 3" (1)
10) 1" x 4' (tapers to 7/8" on one end) (1)
11) 1" x 5' 5" (1)
12) 1" x 6' (1)
13) 1-1/8" x 3' 2" (tapers to 1" on one end) (1)
14)  1-1/8" x 4' (1)
15) 1-1/8" x 5' 5" (1)
16) 1-1/8" x 6' (2)
17) 1-1/4" x 3' 2" (1)
18) 1-1/4" x 3' 5-1/2" (1)
19) 1-1/4" x 4' (1)
20) 1-1/4" x 4' (tapers to 1-1/8" on one end) (1)
21) 1-1/4" x 6' (1)
22) 1-3/8" x 6' (1)
23) 1-3/8" x 9' 2" (1)
24) 1-3/8" x 12' (5)
25) 1-1/2" x 4' 9" (1)
26) 1-1/2" x 6' (1)
27) 1-1/2" x 11' 8" (1)
28) 1-1/2" x 12' (4)
29) 1-7/8" x 6' 4" (1)

Items 1-4 25-cents per foot, items 5-12 50-cents per foot and items 
13-29 75-cents per foot.

The following small yagi booms are available:

1) 1-1/2" x 20' 6" (this looks like a Cushcraft yagi boom in 4 sections 
with taper on one end) $20.00
2) 1-1/4" x 12' (with boom to 1-1/2" mast clamp in center) $10.00

The following Telrex long yagi elements are available:

1) 16' 9-1/2" element (1-3/8" x 6' 1" in center with taper to 1" on both 
ends, 7/8" element ends with corona balls. 1-1/2" x24" center sleeve for 
structural support)
2) 15' 8" element (identical to #1)
3) 15' 11-1/2" (identical to #1)
4) 16' 5-1/2" (identical to #1)
5) 18' 6-3/4" (similar to #1 but 8' 1" center)
6) 17' 7-3/4" (identical to #5)

These elements may be the reflector and directors for a Telrex 10-meter 
yagi. $12.00 each

Also available are components of a Telrex long yagi:

1) 12' 3/4" long element center section (1-3/8", tapering to 1", with 3' 
1-1/2" center sleeve) (2) $9.00 each
2) 7/8" x 5' 1-1/4" element end, with corona ball (1) $4.00
3) 7/8 x 5' 3-1/4" (like #2) (1) $4.00

I also have a large, heavy, wood desk that was our operating position 
until I built a desk to accommodate two operating positions. Three 
drawers to the right, slide out keyboard drawer in the center and one 
slide out printer shelf to the left. The desk is 6' 3" wide, 24-1/2" 
deep, 32" high and in reasonably good condition. $10.00. I also have an 
old military-style steel desk which would make a nice work desk, in good 
condition, $5.00.

I also have miscellaneous items like boom/mast brackets and hose clamps 
(mostly large sizes).

All items pick up only in Silver Springs. I will be home most of the 
weekend and if you wish to stop by to see these items please call 
775-997-8129.


Thanks,

Jack, W6NF
(still in the getting ready to move mode)