[CVRC] Antennas and accessories FS

[Jack/W6NF]

The following is for sale, pick-up only in Silver Springs, NV.

1) Mosley Classic 33 3-element triband yagi, disassembled. Good 
condition needing only trap end caps. $100.00

2) Cushcraft A4S 4-element triband yagi (3 elements on each band but 
separate reflector for 10-meters), disassembled. Good condition needing 
only trap end caps. $125.00

3) Force 12 C4S 20/15/10 tribander with 40-meter linear-loaded dipole 
element. I have it in the air now as a C3S having removed the 40-meter 
element. Works great and needs only some hardware for the 40-meter 
element (available from Force 12) to reassemble as the C4S. $225.00

4) US Tower MA-40 40-foot telescoping tower with MARB-40 rotating base 
and MAF-40 raising fixture. Excellent condition and presently in service 
at my home. Can be tilted over and readied for transport in less than 
1/2-hour. $1200.00

5) 40-meter 4-square vertical array. Consists of the Comtek phasing 
unit, Comtek phasing cables (4) and four 32-foot cammo support tubes 
with extension "stingers" for tuning to frequency. The cammo tubes can 
be disassembled into either 4 or 8 foot lengths. $500.00 for everything.

6) 80-meter 1/4-wave vertical. This was the DX Engineering 65-foot 
vertical until the top 3 sections broke off in one of our 80MPH winds. I 
rebuilt the vertical by adding 3 sections of 2-inch aluminum tubing to 
the bottom and the vertical has survived all winds for the past 3 years. 
Eight 1/4-wave radials will be included. $100.00 for vertical and radials.

7) 2-meter EME array, consisting of four 13-element home-brew yagis, 
home-brew power divider and the H-frame assembly. Three of the yagis 
need work and the H-frame could use some new stainless steel clamps. I 
had the forth yagi assembled recently and it works great. This array was 
used by NC7K/K7XC in his 1991-1999 EME operations. $300.00 for everything.

8) Top-Ten Devices Six-Way Antenna Relay Box with Yaesu/Elecraft 
decoder. Presently in use at my home. $175.00

9) TET 2-section aluminum roof-top tower with plate for mounting Ham-M 
style rotor. This is the *original* TET tower sold by KLM back in the 
'70's and is in excellent condition. $100.00

10) Full-size 15-meter four element OWA yagi. Designed for side-mounting 
on a Rohn 25 tower but can be used in a normal configuration by adding 
1-inch to the ends of each element. Designed for high-wind application. 
Presently assembled and on the ground but can be disassembled quickly. 
$100.00

11) Full-size 15-meter 3-element yagi constructed from Telrex long-yagi 
components. Very rugged and heavy with wind survivability beyond 
anything we experience around here (except maybe Slide Mountain). 
Assembled and on the ground but can be disassembled easily. $50.00

12) Full-size 20-meter 2-element yagi with boom and element materials 
included to extend to 3 elements. Built from the same materials as the 
15-meter yagi listed above and just as rugged. Also assembled and on the 
ground. $75.00

(Both items 11 and 12 have been in the air at my place for testing and 
worked very well)

If you have any questions you may e-mail or call at 775-997-8129.

If anyone wishes to re-post this to local reflectors to which I am not 
subscribed I would appreciate it!

Thanks and 73,

-- 
Jack, W6NF
Silver Springs, NV
DM09ji